FENIX HM51R Ruby V2.0 RECHARGEABLE HEADLAMP - Full Black

The second generation of the very popular Fenix ​​HM51R Ruby V2.0 rechargeable headlamp offers a luminous flux of up to 700 lumens (ANSI) of neutral white light (4500 K) with an afterglow of up to 120 meters and is also equipped with red LEDs. It is powered by one rechargeable battery type RCR123A (included in the package), which is charged directly in the flashlight via a modern USB-C connector, alternatively it is possible to use a disposable lithium battery CR123A (with a limited maximum power of 150 lumens). In addition, there is an indicator LED in the control button, thanks to which you will always know when to charge the battery. The tip of the lamp is magnetic, so it can be easily attached to anything iron. The HM51R has nine different lighting modes that allow you to choose between high performance and long life (up to 120 hours). The lamp is powered by digitally controlled constant current to guarantee constant light output even when the voltage in the batteries is reduced (during their gradual discharge).

The all-metal construction ensures high durability, optimal cooling and at the same time is fully waterproof according to the IP68 standard up to a depth of 2 meters under water. The practicality of the headlamp increases the possibility of removing the light from the head holder and using it as a small flashlight. In addition, the headlamp is equipped with a removable steel clip, so you can easily attach it to your pocket or strap. The Fenix ​​HM51R V2.0 headlamp is the ideal companion for various sports activities, trips to nature and to the home and to work.

The Fenix ​​HM51R headlamp is a limited edition, which is based on the Fenix ​​HM50R headlamp and offers a number of improvements. For example, a warmer shade of light, a magnetic tip, constant regulation in most modes, more red light modes and more. If you are interested in all the differences between the two models, read the article Comparison of Fenix ​​HM50R V2.0 and Fenix ​​HM51R Ruby V2.0.

All lamp parameters (luminous flux, battery life, water resistance, afterglow and impact resistance) are measured in accordance with the ANSI / NEMA FL 1-2009 standard.

Specifications:

• Power: 700 lm
• Range: 120 m
• Max endurance: 120 hours
• Power supply: 1x CR123A, 1x RCR123A, USB charging
• Number of modes: 9
• Light color: Neutral white (4000-5000 K), Red
• Water resistance: IP68 (draft 2 m)
• Light source: Cree XP-G3, Everlight 2835
• Weight: 80 g

Features of Fenix ​​HM51R Ruby V2.0:

• The premium powerful Cree XP-G3 LED with a neutral light shade (4500 K) and a lifespan of 50,000 hours and two red Everlight LEDs are used.
• Five white light modes: 700 lumens (0.5 hours) -> 400 lumens (1.5 hours) -> 150 lumens (2.5 hours) -> 50 lumens (8 hours) -> 3 lumens (120 hours)
• Four red light modes: 5 lumens (36 hours) -> 1 lumen (100 hours) -> red flashing 5 lumens (72 hours) -> SOS 5 lumens (72 hours)
• Measured with a Fenix ​​RCR123A Li-ion battery with a capacity of 700 mAh (included).
• It uses one Fenix ​​RCR123A 700 mAh Li-ion battery for power supply. which is part of the package.
• One CR123A disposable 3V lithium battery can be used for power in an emergency, but the highest available mode will be 130 lumens.
• Digital constant power control.
• Charging via the USB-C connector on the side of the headlamp, the charging time for a fully discharged battery is approx. 1.5 hours.
• Continuous light cone with afterglow up to 120 meters (3690 cd)
• 66 mm length x 36 mm width x 32 mm height (including headlamp holder).
• 80 grams (including strap and battery), 61 grams (without battery).
• Battery capacity indication and low voltage warning.
• The flashlight has a memory and always switches on in the last set mode (applies to both white and red light).
• Magnetic end cap, headlamp can be attached to anything iron.
• Battery reverse protection (polarity reversal).
• The cleverly designed holder also works as a buckle if you remove the headlamp from the strap.
• Comfortable perforated strap with reflective elements.
• Simple operation with one switch.
• Body made of high-strength aviation aluminum alloy A6061-T6.
• Durable hard scratchable surface - Type III hard anodized.
• Dustproof and waterproof according to the IP68 standard (tested underwater at a depth of 2 meters for 4 hours).
• Impact resistant falls from a height of 2 meters.
• Quality TIR optics with high light transmission.
• The package includes the HM51R headlamp, ARB-L16-700P battery, spare O-ring, USB-C charging cable, steel clip.
• The Fenix ​​APB-20 case and a set of black AFH-02 straps without reflective elements can be purchased with the headlamp. Suitable for hunting, army or police, for example.
• After removing the headlamp, the Lockblock and Bikeblock brackets can be attached to the handlebars.
• It is also possible to buy a USB adapter for the electrical network and a USB adapter for the car or a spare battery RCR123A with a micro-USB connector or a spare battery with a higher capacity of 800 mAh.

Use:

By default, there may be a black insulating cap on the battery inside the flashlight. Remove it from the battery before using it for the first time.

The switched off headlamp is switched to the last used white light mode by holding down the button for 0.5 seconds.
The switched-off headlamp is switched to the last used red light mode by pressing the button twice quickly.
The switched-on headlamp is switched off by holding down the button for 0.5 seconds.
If the headlamp is switched on, the power modes can be cyclically switched in the order of 3 - 50 - 150 - 400 - 700 lumens (when switched on in white light) resp. red 1 lumen - red 5 lumens - red flashing - red SOS (when switched on in red light). The flashlight has a memory and always switches on in the last set mode (applies to both white and red light).

Overheat protection: Operation in the highest mode is limited to 1 minute, then the power is gradually reduced to approx. 500 lumens within 5 minutes. If the internal temperature of the lamp rises above 60 ° C, it will automatically start to reduce the power in gradual steps until the temperature stabilizes. As soon as the lamp temperature drops below 60 ° C, the power gradually increases again. Operation in 400 lumens mode is limited to 5 minutes, then the power is gradually reduced to 200 lumens in 5 minutes.

Battery charge status indication: After a short press of the button (the headlight must be switched off), the LED indicator in the button is activated. If the LED is green, the battery is more than 80% charged. Green blinking means 50-80% capacity. If it glows red, it is 20-50% charged. Flashing red indicates that less than 20% of the battery capacity remains. The indication only works properly with RCR123A / 16340 rechargeable batteries.

Charging: Open the rubber cover of the charging connector and connect the enclosed cable to the flashlight (USB-C connector), connect the other end of the cable to a computer, power bank or USB adapter to the mains or car (not included). During charging, the side button lights up red and lights up green when fully charged. After charging the flashlight, reseal the charging connector with a rubber cap. Charging a fully discharged battery takes about 1.5 hours. In an emergency, the flashlight can also be used while charging, but only the white 5-lumen mode and red modes will be available.

Low battery warning: If the battery voltage drops below the set level, the headlamp will automatically switch to lower power modes. If the headlamp is already switched to the lowest power mode and the battery is critically discharged, the indicator in the button will start flashing red. However, the headlamp will continue to illuminate until the battery is completely discharged. Note: the low battery warning is only calibrated to the voltage of the rechargeable Li-ion batteries.

Locking the headlamp against unintentional switching on: Loosen the headlamp battery lock by a quarter of a turn, this will break the electrical contact and the headlamp cannot be switched on. The button can also be locked electronically - with the headlamp off, hold down the button for 3 seconds. When locked, the flashlight flashes red. To unlock, hold down the button for 3 seconds again.

Notice:

Do not disassemble the sealed part of the lamp head yourself, as this will void the warranty.
When using a disposable CR123A battery, do not attempt to charge it in the flashlight.
If the protective rubber rings appear damaged after prolonged use, replace them. The rings should also be lubricated to prevent rubber erosion. By following these rules, the flashlight will be properly protected against water.
If the flashlight is blinking, does not switch to higher power modes, or does not turn on, this may be one of the following reasons:
The battery is low - charge or replace it.
The contacts inside the flashlight are dirty - clean them with a cotton swab.
The back of the lamp is loose - tighten it.

Five-year warranty on the flashlight, two-year warranty on the battery.