No products
Powerful tactical flashlight Fenix TK25 UV, which offers a range of 225 meters, 1000 lumens and a maximum battery life of up to 110 hours. The flashlight also features six light modes and waterproofing up to two meters of submersion. In a nutshell, the perfect partner for exploring dark corners.
By buying this product you can collect up to 25 points.
View loyalty points rules.
: FENIX
FE18650LI35
The top-of-the-line Fenix 18650 3500 mAh rechargeable batteries (ARB-L18-3500) with electronic protection are based on the top NCR18650GA cells from Panasonic / Sanyo with improved LiNiCoO2 technology, which brings higher safety and longer life. Li-ion rechargeable batteries are characterized by a very high capacity, do not suffer from the memory effect...
: FENIX
FERCR123ALIIONUP
: FENIX
FENIAER03V20
Tactical cable switch AER-03 V2.0 is designed only for Fenix TK16 (does not fit Fenix TK16 V2.0), Fenix TK20R, Fenix TK25 IR, Fenix TK25 R&B, TK25 Red, TK25 UV, Fenix TK26R and Fenix TK32.
: FENIX
ALG16
Metal mounting for flashlight with body diameter 23,5 - 26,0 millimeters and head diameter up to 40 millimeters. The ALG-16 mount allows the flashlight to be attached to the M-LOK weapon interface.
The Fenix TK25 UV is a tactical flashlight that features an innovative mode switching head that allows you to switch between white light and ultra-violet light. The 3000mW UV light is great for counterfeit currency detection as well as other professional applications. Two tactical tail switches allow you to easily activate the light’s modes. The high-performance flashlight’s white light includes 4 levels of output and variable strobe. The Turbo setting emits a max output of 1000 lumens and beam distance of 738 feet (225 meters). Compatible with AER-03 pressure switch, this flashlight is a perfect for most law enforcement applications.
Flashlight Size:
Length: 5.6” (142.6mm)
Diameter: 1.0” (25.4mm)
Head: 1.57” (40mm)
Flashlight Weight: 5.5 oz. (156.5g) excluding battery
Batteries: One 18650 rechargeable Li-ion batteries or two 3V CR123A Lithium batteries
Included: Lanyard, holster, spare O-ring, body clip
Dual Switches
The round switch is the tactical switch and the oval switch the functional switch.
ON/OFF
Tap the tactical switch to momentarily turn on the light; the light will activate the last memorized output on White light mode, or last memorized output on UV light mode; release and the light will go out.
Fully press the tactical switch to constantly turn on the light. Press again to turn off the light.
With the light switched off, press the functional switch for instant strobe activation on White light mode, or the UV light mode.
Strobe
With the light switched on on White mode – long press the functional switch to activate strobe. Click once again to return to previous output.
Output Selection
With the light on on White mode – single click the functional switch to cycle through Low→Med→High→Turbo.
Mode Switching
Rotate the light head to switch between white and UV light modes.
Intelligent Memory Circuit
The light memorizes the last selected brightness level on White and Red light modes. When turned on again the previously used brightness level will be recalled.
Low-voltage Warning
When the voltage level drops below the preset level, the flashlight is programmed to downshift to a lower brightness level until Low output is reached. When this happens in Low output mode, the flashlight blinks three times every five minutes to remind you to replace the battery. To ensure normal use, the flashlight will not turn off automatically and will work till the battery runs out completely. (Note: This only works with the white light mode, and light blinks until battery runs out.)
Overheat Protection
The light will accumulate a lot of heat when used on Turbo output level for extended periods. When the light reaches a temperature of 65°C or above, the light will automatically step down by a few lumens to reduce temperature. When the temperature is reduced, the output will gradually return to Turbo output level.
Battery Replacement
Unscrew the tail cap to insert the battery with the anode side (+) towards the light head, then screw the tail cap back on.
Usage and Maintenance
A: The battery needs replacing.
Solution: Replace battery (Ensure battery is inserted according to the manufacturer’s specifications).
B: The threads, PCB board contact or other contacts are dirty.
Solution: Clean the contact points with a cotton swab soaked in rubbing alcohol.
If the above methods don’t work, please contact your authorized distributor.
Warning
This flashlight is a high-intensity lighting device capable of causing eye damage to the user or others. Avoid shining the flashlight directly into anyone’s eyes.
Color | Black |